Multi-Tech Systems ISI4608-PCI User Manual
12
ISI4608-PCI User Guide
Introduction
This chapter describes installation of the Multi-Tech ISI4608-PCI as an
expansion card in your PCI bus computer.
Safety Warnings Telecom
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is
2. Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
3. This product is to be used with UL and CUL listed computers.
4. Never touch uninsulated telephone wires or terminals unless the
4. Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
5. Use caution when installing or modifying telephone lines.
6. Avoid using a telephone (other than a cordless type) during an
6. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electrical shock from
lightning.
7. Do not use the telephone to report a gas leak in the vicinity of that
leak.
8. To reduce the risk of fire, use only No 26 AWG or larger
Telecommunication line Cord.
Hardware Installation Procedures
To install the ISI4608-PCI card into your PC-PCI bus computer:
1. Before handling the ISI4608-PCI, discharge any static in your body
by touching a piece of grounded metal such as the computer
chassis.
2. Carefully remove the ISI4608-PCI from its antistatic bag, handling it
only by the mounting bracket and edges. Do not touch the gold-
plated connectors along the bottom edge. (You may want to save
packaging for possible future use.)
3. Visually inspect the ISI4608-PCI. If you have any concerns about
its condition, call Technical Support at (800) 972-2439.