Multi-Tech Systems ISI4608-PCI User Manual
31
Chapter 3—Software/Driver Installation
ISI460x-PCI Software Installation Procedure
for Windows 95/98/Me
1. Turn off the computer.
2. The ISI460x-PCI card must be installed in a PCI expansion slot in
2. The ISI460x-PCI card must be installed in a PCI expansion slot in
the computer. If not, follow the computer manufacturer's
instructions concerning installation of expansion cards. Observe
standard precautions regarding electro-static discharge (ESD)
when handling the ISI board (the board should be kept in its
shipping bag until used). During installation, handle the ISI circuit
card by its edges and keep one hand in contact with the computer
chassis.
3. Turn on the computer and start Windows 95/98/Me.
4. Windows will autodetect the ISI460x-PCI card. When the Add
3. Turn on the computer and start Windows 95/98/Me.
4. Windows will autodetect the ISI460x-PCI card. When the Add
New Hardware Wizard screen appears, click Cancel.
5. Insert the MultiTech ISI driver CD-ROM into the CD-ROM
5. Insert the MultiTech ISI driver CD-ROM into the CD-ROM
drive. (If driver was downloaded from MultiTech web site and
placed on a diskette, insert diskette into floppy drive now.)