DCS 1.0x User Manual
dCS Verona User Manual
Manual for Software Issue 1.0x
dCS Ltd
September 2004
Manual filename: Verona Manual v1.0x.doc
Page 19
email: more@dcsltd.co.uk
English version
web-site: www.dcsltd.co.uk
The checking routine will find a sequencing error and
Non Seq
or
Bad CD!
will
appear on the display.
do this:
Turn the power off and on to reboot. This message will scroll across the display:
Bad CheckSum – Press Function button to attempt recovery
or
Bad CheckSum – Press Mute button to attempt recovery
or
Bad CheckSum – Press Menu button to attempt recovery,
depending on the model.
do this:
Press the appropriate button once.
The original software is retrieved from the internal backup while displaying
Wait...
. This may take a few minutes. When recovery is complete, the unit
re-boots.
do this:
Run the
CD Update
routine again to load the new software.
Factory
Factory
Factory
Factory
– Restoring Factory Defaults
This feature sets most of the parameters back to the factory default settings.
This can be useful if the settings are accidentally changed and you need to
reset the unit to a standard configuration, or your children play with it.
This can be useful if the settings are accidentally changed and you need to
reset the unit to a standard configuration, or your children play with it.
do this:
Open the Menu and step through until the display shows
Factory
.
do this:
Press the
Select
button and leave the menu to time out.
The unit will return to normal operation set up as follows:
•
Clock Frequency
to
44.1kHz
•
Dither
to Off
•
Couple
to
TTL
•
Display
brightness
to
Bright 4
•
Timeout
to
15 secs