HP (Hewlett-Packard) RX3600 User Manual

held for at least four seconds. The following values are reset to factory defaults when the button
is held for at least four seconds:

•

Serial terminal baud rate settings

•

User names and passwords

Core I/O Board Ports

Table 1-6

lists a description of the core I/O board ports shown in

Figure 1-14

Table 1-6 Core I/O Board Ports

Description

Port

LAN port dedicated for remote access to the iLO 2 MP

10 Base-T/100 Base-T LAN

Local serial port

Auxiliary Serial

Local serial port that provides a console connection to the server

Console Serial (iLO 2 MP)

Two public USB 2.0 ports used primarily to connect to a keyboard and mouse
for console input functions (Windows and Linux operating systems only)

USB

VGA port used primarily to connect to a monitor that displays console output
(Windows and Linux operating systems only)

VGA (optional)

iLO 2 MP Status LEDs

Table 1-7

shows the states and status of the iLO 2 MP status and LAN LEDs.

Table 1-7 iLO 2 MP Status and LAN LEDs

Status

States

iLO 2 MP LED

Standby power is on

Solid green

Standby power

iLO 2 MP self test running

Amber

iLO 2 MP Self test

Self test completed

Off

Operational and functional

Flashing green

iLO 2 MP Heartbeat

Operational and functional

Flashing green

BMC Heartbeat

Activity

Blinking green

Link Status

Link with no activity

Solid green

No link

Off

100 Mb link

Solid amber

Link Speed

10 Mb link

Off

The LED is solid amber when ac power is first applied. It remains solid amber for a few seconds until the iLO 2 MP
completes its self test; the LED then turns off.

System LAN

The system LAN functionality is provided by the LAN core I/O card. The ports on the LAN core
I/O card are two RJ-45 style 10 Base-T/100 Base-T/1000 Base-T system LAN ports:

Table 1-8

show the system LAN link status and speed LEDs states and status.

Controls, Ports, and LEDs