Planar M70L User Manual
Adjusting Input Levels
36
m70L Installation & Configuration Guide
8
If the color bar pattern has a pluge, you can use it to adjust Brightness. Pluge
stands for Picture Line-Up Generation Equipment. A pluge is used to calibrate the
black level on a video monitor.
stands for Picture Line-Up Generation Equipment. A pluge is used to calibrate the
black level on a video monitor.
9
Although it is not required, we recommend that you save the configuration to a
memory slot. (See "Saving Configurations" on page 74.)
memory slot. (See "Saving Configurations" on page 74.)
10
If you have more than one source coming through the same connector, adjust
Input Levels for each source.
Input Levels for each source.
Pluge
Adjust Brightness so you cannot
see the different between these
two marks,
see the different between these
two marks,
but you can see the difference
between these two marks.
between these two marks.