Intel 1520 User Manual
Chapter 5 Using the Command-Line Interface
51
These menu selections let you do the following:
✔ setup—Change the system’s network address configuration and time
✔ main—Start or stop the cache and proxy services, check version information,
clear statistics, and install and delete software. See Using the main menu‚ on
page 54 for more information.
page 54 for more information.
✔ config—Configure the appliance, including server, protocols, security, and
✔ monitor—Monitor performance by viewing statistics. See Using the monitor
✔ expert—Use the appliance’s expert feature. See Using the expert menu‚ on
✔ save—Save the current configuration to a floppy disk. See Using the save
✔ load—Load a saved configuration from a floppy disk. See Using the load
✔ logoff—Logoff from the current login.
Navigating the command-line interface
The command-line interface consists of a series of menus that you can access to
adjust the system’s network configuration and control, and to configure and
monitor the appliance.
adjust the system’s network configuration and control, and to configure and
monitor the appliance.
The following table explains how to navigate the interface:
To do this...
Do this
Move from one menu item to another
Use the up and down arrow
keys
keys
Select a menu or menu item
Move to the item and press
Enter
Enter
Return to the previous form or menu screen
Press CTRL-X
Accept an action confirmation box
Press CTRL-X
Accept changes to the form and exit it by
returning to the previous form or menu screen
returning to the previous form or menu screen
Press CTRL-X
Save information you have entered in a form’s
field and position the cursor at the next field.
You must press Enter for each field in the form
field and position the cursor at the next field.
You must press Enter for each field in the form
Press Enter
Cancel all changes to a form and exit it by
returning to the previous form or menu screen
returning to the previous form or menu screen
Press ESC