GE GFK-1918D User Manual
G E F a n u c P L C Ta r g e t s
Interacting with the PLC
GFK-1918D
CIMPLICITY Logic Developer - PLC Version 4.00
37
To st ar t a PLC
• In the
Project tab of the
Navigator, right-click a
target, point to Online Commands or to Offline
Commands, and then choose Start PLC.
The target PLC begins executing its program.
To st op a P LC
1.
In the
Project tab of the
Navigator, right-click a
target, point to Online Commands or to Offline
Commands, and choose Stop PLC.
The Stop PLC dialog box appears, prompting you to enable or disable the PLC’s
outputs.
outputs.
2.
Select an option.
3.
Click OK.
The target PLC stops executing its program.
F a u l t T a b l e s
The PLC and I/O Fault Tables display fault information logged by the CPU or
modules in the PLC. This information is used to determine if there are problems
with the PLC hardware or software running in the PLC’s CPU. To view the PLC and
I/O fault tables, your computer must be online to the PLC.
modules in the PLC. This information is used to determine if there are problems
with the PLC hardware or software running in the PLC’s CPU. To view the PLC and
I/O fault tables, your computer must be online to the PLC.
To view t he f ault t ab le r epo r ts
• In the
Project tab of the
Navigator, right-click the
target you want to report on and choose
Diagnostics.
Want to know more? In the Help Index, look up “starting the PLC” and “stopping the PLC”.