Manualsbrain.com
  1. Manuals
  2. Brands
  3. GE
  4. PGS975BEM
  5. Leaflet

GE PGS975BEM Leaflet

Download
Page of 2
For answers to your Monogram,
® 
GE Profile
™
 or  
GE
®
 appliance questions, visit our website at 
ge.com or call GE Answer Center
®
 service,  
800.626.2000.
Specification Revised 5/07
230142
You must use the rear filler strip kit shipped with  
the range or the optional accessory backguard  
when installing these ranges
Note: Cabinets installed adjacent to slide-in  
ranges must have an adhesion spec of at least  
194° temperature rating.
Optional Kits for Slide-In Gas Ranges: 
(Available at additional cost)
Lower/Side Trim Kits 
JXS56WW - Lower Trim Kit (White) 
JXS56BB - Lower Trim Kit (Black)
Accessory Backguards 
JXS32BB - Black Accessory Backguard 
JXS37BB - Black Glass Accessory Backguard 
JXS32WW - White Accessory Backguard 
JXS37WW - White Glass Accessory Backguard
Installation Information: Before installing, consult  
installation instructions packed with product for  
current dimensional data.
All GE ranges are equipped with 
an Anti-Tip device. The installation 
of this device is an important, 
required step in the installation  
of the range.
Dimensions and Installation Information (in inches) 
PGS975BEM/WEM 
GE Profile
™ 
30" Slide-In Gas Range
 
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30" Min.
15" Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle 
on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30" Min.
15" Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle 
on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
2-7/8" 
To Front 
Surface Of 
Countertop
20-5/8" 
Door Clearance
From Front 
Surface of 
Countertop
31-1/4
30
A*
Accessory
Backguard
36
2" 
(Grates)
24
Acceptable 
Gas Line & 
Electrical 
Outlet Area
Max. depth of 
cord, plug,
receptacle box
& gas hookup
3-1/2" to prevent
interference   
with drawer
30" Min.
Shave Raised Edge To Clear
31-1/8 Wide Control Panel
30" Min. to 
unprotected 
cabinet from
countertop
23-3/16
18" Min.
13" Max.
3
29-15/16" Min.
30-1/16" Max.
25
9/16
7
12
15
*A – JXS37 is 5-1/4" and JXS32 is 4" 
27-1/2**
44-3/4
(excluding handle)
**Total depth from wall to 
front of closed oven door 
including handle is 30-1/2.
B is 9-1/2" from walls on either side for P2S975, PGS975 
and PGS908 and 6” for PGS968
B
35-7/8"–38"
from floor to
countertop
Counter Cutout Dimensions (in inches) 
2-7/8" 
To Front 
Surface Of 
Countertop
20-5/8" 
Door Clearance
From Front 
Surface of 
Countertop
31-1/4
30
A*
Accessory
Backguard
36
2" 
(Grates)
24
Acceptable 
Gas Line & 
Electrical 
Outlet Area
Max. depth of 
cord, plug,
receptacle box
& gas hookup
3-1/2" to prevent
interference   
with drawer
30" Min.
Shave Raised Edge To Clear
31-1/8 Wide Control Panel
30" Min. to 
unprotected 
cabinet from
countertop
23-3/16
18" Min.
13" Max.
3
29-15/16" Min.
30-1/16" Max.
25
9/16
7
12
15
*A – JXS37 is 5-1/4" and JXS32 is 4"
 
27-1/2**
44-3/4
(excluding handle)
**Total depth from wall to 
front of closed oven door 
including handle is 30-1/2.
B is 9-1/2" from walls on either side for P2S975, PGS975 
and PGS908 and 6” for PGS968
B
35-7/8"–38"
from floor to
countertop