Aleratec 330107 User Manual

www.aleratec.com

21

This function is used to format flash drives with the duplicator. If the 

original format is FAT, then the format operation will not change the format, 

but will write over any data on the flash drive. 

If the format is not FAT (e.g. NTFS, Linux, or FAT multi-partition) the 

controller will check the capacity of the flash drive. If the capacity is greater 

than 2GB, it will automatically use FAT 32 format. If the capacity is less 

than 2GB, it will use FAT 16.

1.  Load the flash drives into the USB Duplicator. Use the UP or DOWN 

arrow to scroll through the menu until Utility is displayed on the LCD 

screen.

2.  Use the UP and DOWN arrow keys to check the status of any of the 

flash drives loaded in the machine. Drives inserted in the first port 

(source) will not be formatted. 











