AMCC 9500S User Manual

Chapter 2. CLI Syntax Reference

50

The show selftest command displays the current selftest background task 
schedule as illustrated below. Selftests do not have a time duration since they 
are completed momentarily.

 //localhost> /c1 show selftest

 Selftest Schedule for Controller /c1

 ========================================================

 Slot    Day     Hour            UDMA            SMART

 --------------------------------------------------------

 1       Sun     12:00am         enabled         enabled

 2       Mon     12:00am         enabled         enabled

 3       Tue     12:00am         enabled         enabled

 4       Wed     12:00am         enabled         enabled

 5       Thu     12:00am         enabled         enabled

 6       Fri     12:00am         enabled         enabled

 7       Sat     12:00am         enabled         enabled

/c

x

 add rebuild=

ddd:hh:duration

This command adds a new background rebuild task to be executed on the day 
ddd (where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at the hour hh 
(range 0 .. 23), for a duration of duration (range 1 .. 24) hours. A maximum of 
seven rebuild tasks can be scheduled. This command will fail if no (empty) 
task slot is available. 

 //localhost> /c1 add rebuild=Sun:16:3

adds a rebuild background task schedule to be executed on Sundays at 16 
hours (4:00 PM) for a duration of 3 hours.

Setting up a rebuild schedule requires several steps, and several different CLI 
commands in addition to /cx add rebuild.

1

Use the /cx show rebuild command to display the current schedule for 
rebuild tasks. (For details, see page 46.)

2

If any of the scheduled tasks do not match your desired schedule, use the 
/cx del rebuild command to remove them. (For details, see page 53.)