B&B Electronics 3PCISD4B User Manual
Documentation Number 3PCISD4x-3903 Manual
Chapter 3
27
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
WINDOWS NT 4.0
1.
Configure each port on the PCI card to the desired RS-
232/422/485 mode using the jumpers for Port 1, 2, 3, & 4.
232/422/485 mode using the jumpers for Port 1, 2, 3, & 4.
2.
Install the card in the slot, start the computer, and log on to
Windows NT 4.0 as an Administrator or ask your system
administrator to install the software.
Windows NT 4.0 as an Administrator or ask your system
administrator to install the software.
3.
Open the Control Panel. (Select Start, Settings.)
4.
Select Add/Remove Programs.
28
Chapter 3
Documentation Number 3PCISD4x-3903 Manual
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
5.
Click the Install button, then click Next.
6.
Insert the driver disk into drive A:
7.
Enter A:\WinNT40\Setup.exe in the Command line for
installation program window (as above).
installation program window (as above).
8.
Click Finish to start the Setup program.
9.
Click Next. Follow the instructions until completed.