Epson EMP Monitor User Manual
3
Operating Environment
You can display status information on a computer screen for multiple
projectors that are connected to a network and also carry out batch operations
on all projectors such as turning the power on and off and changing the image
source. A maximum of 64 projectors can be monitored and controlled by batch
operations.
projectors that are connected to a network and also carry out batch operations
on all projectors such as turning the power on and off and changing the image
source. A maximum of 64 projectors can be monitored and controlled by batch
operations.
System configuration example
Compatible computers
* Macintosh computers cannot be used.
Before starting operations
Check the following points before starting up EMP Monitor.
• EMP Monitor must be installed in the computer to be used for monitoring
and control.
• The computer and the projectors must be connected to the network.
• If using Windows 2000, NT4.0 or XP, the computer must be started up in
• If using Windows 2000, NT4.0 or XP, the computer must be started up in
Administrator mode.
Projector A
Projector B
Projector C
Turn on
projector B
projector B
EMP Monitor
TIP
If the projector's "Network Monitoring" or "Standby Mode"
configuration menu is set to "ON" or "Network ON", the projector
can still be monitored when it is in standby mode (when the (Power)
indicator is lit orange).
configuration menu is set to "ON" or "Network ON", the projector
can still be monitored when it is in standby mode (when the (Power)
indicator is lit orange).
OS*
98SE/Me/NT4.0/2000 Professional/XP Home Edition/XP
Professional
Professional
CPU
Pentium MMX 166 MHz or higher (Pentium II 233 MHz
or higher recommended)
or higher recommended)
Memory
capacity
capacity
64 MB or more (128 MB or more recommended)
Free hard disk
space
space
6 MB or more
Display
XGA (1024
×768) or higher resolution, 16 bit or higher
display colour