GE LTC MAP User Manual

The LCD is a 20 character by 4 line display (Figure 2-3).  It displays 

operating and status conditions. Screens are scrolled through using 
the Operating Conditions and Alarm Status & Settings buttons.  

        L  T  C  -  M  A  P    2  1  3  0         

    r  e  v    2  1  3  0  .  x  x  .  y  y         

                                       

  c  o  p  y  r  I  g  h  t    (  C  )    1  9  9  7   

 

<

 

<

 

Operating 

Alarm Status 

Conditions 

& Settings 

Figure 2-3: Display with Control Buttons 

CAUTION: The serial port and the modem cannot function 

simultaneously. When using the serial port for communications, the 

internal modem (if installed) must be disconnected at JP8; otherwise 

the serial port will not function.   

The serial port is a 9-pin male DB-9 connector.  This port allows direct 

connection, utilizing a null modem cable, between the LTC-MAP 2130 

and a portable computer for data transfer.   Data transfer rate is 

19.2 kbps. 

The serial port does not support dumb terminal operation. In order for 

communications to take place: 

• 

 A null modem cable must be installed between the monitor serial 

port and personal computer serial port.   

• 

SAGE



 host software must be installed on the personal computer.  

NOTE: A null modem cable is available (Part No. 10101MP ).