GE LTC MAP User Manual

 
3-10 

Refer to Table 1-1 for a list of sensors available for use with the  

LTC-MAP 2130 Monitor.  Detailed installation information for each sensor is 

provided in the referenced documentation. 

Some general notes to consider during sensor selection and installation: 

• 

Thermowell RTD sensors require a signal conditioning transmitter to 

provide a 4-20 mA output to the monitor.   

• 

Figure 3-4 provides Sensor and Input Connection locations on the I/O 

board. 

• 

We recommend using #18 AWG shielded, twisted pair wire for sensor 

input connections to the I/O board, unless stated otherwise in the 

documentation provided with the sensor.  Use of shielded twisted pair 

improves noise immunity; the shield should be grounded at one end 

only.