GE LTC MAP User Manual

16.  Re-install the hardware that secures the CPU board to the face panel. 

17.  Re-install the ribbon cable and modem serial port connector. 

18.  Remove the static control wrist strap. 

19.  Re-install F1 in the power circuit board. 

20.  Depress the 

 and 

 buttons 

while applying power to the system. 

21.  Verify that the LTC-MAP displays copyright information for ten seconds 

before going blank. 

  NOTE: If the copyright information does not appear, and you have 

checked the EPROM installation, contact Reuter-Stokes, Inc.. 

22.  Place the old EPROM in the protective packaging and return it to 

Reuter-Stokes, Inc.