Gateway 22 INCH WIDESCREEN LCD MONITOR User Manual
www.gateway.com
9
Using Picture-in-Picture (PIP)
Picture-in-Picture (PIP) is a convenient way to view video from multiple video sources at the same
time. Refer to the following chart to determine which combinations of video sources can be used
as a PIP display.
time. Refer to the following chart to determine which combinations of video sources can be used
as a PIP display.
Only 480i component (Y Pb Pr) video can be used with VGA as a PIP. With this combination, the Swap feature is not available. To switch
to full-screen component video when 480i content is used as a PIP, touch the Input Select button in the Shortcut menu.
to full-screen component video when 480i content is used as a PIP, touch the Input Select button in the Shortcut menu.
If a 480p source is input to the Y Pb Pr jacks and Y Pb Pr is a PIP display within a VGA main display, the PIP image will be distorted.
Change the output of your external Y Pb Pr device to 480i if PIP is required with VGA to eliminate the PIP distortion. For more
information, see your Y Pb Pr device’s user guide.
Change the output of your external Y Pb Pr device to 480i if PIP is required with VGA to eliminate the PIP distortion. For more
information, see your Y Pb Pr device’s user guide.
** For some video resolutions, refresh rates, and video scaling modes, PIP may not be allowed. If you receive a message that PIP is not
available, try the following:
available, try the following:
■
Adjust the refresh rate in Windows to 60 Hz. See Windows online Help for more information.
■
Adjust the video scaling mode to Wide on your monitor.
■
Change the resolution of the Windows desktop to match your monitor’s full resolution of 1680 × 1050. For more information see
.
Geometry menu
(VGA mode only)
H Position—Moves the display image left and right.
V Position—Moves the display image up and down.
Clock—Minimizes any vertical bars or stripes visible on the screen background. The horizontal screen size
will also change.
will also change.
Phase—Minimizes any horizontal distortion and clears or sharpens the displayed characters.
Advanced menu
Color—Customizes the color levels.
Language—Changes the language of the OSD.
LED Mode—Changes the brightness of the Standby and Power LED to Day Mode or Nite Mode. When
watching movies in a darkened room, you may want to change the LED mode to Nite Mode to avoid an
over-bright, distracting power LED indicator.
watching movies in a darkened room, you may want to change the LED mode to Nite Mode to avoid an
over-bright, distracting power LED indicator.
DVI Video mode—Changes the DVI video mode by enabling either RGB Color Space (used for digital input)
and YUV Color Space (used for analog TV input such as NTSC, PAL, and SECAM).
and YUV Color Space (used for analog TV input such as NTSC, PAL, and SECAM).
Information—Displays current screen resolution and input source for the main display.
Resolution reminder—If the computer display resolution (VGA and DVI) is not set to 1680 × 1050, displays
a reminder that you should change your computer’s settings to use the optimum 1680 × 1050 resolution.
If you prefer using your monitor at a resolution less than 1680 × 1050, use this option to turn off the
Resolution Reminder. For information on changing your computer’s display resolution, see
a reminder that you should change your computer’s settings to use the optimum 1680 × 1050 resolution.
If you prefer using your monitor at a resolution less than 1680 × 1050, use this option to turn off the
Resolution Reminder. For information on changing your computer’s display resolution, see
UltraResponse—If you experience video quality problems with shadows in fast-moving images, you can
disable this to return to the display’s native response time.
disable this to return to the display’s native response time.
Reset All—Resets all values to the factory settings.
Main display
PIP display
VGA**
DVI**
Component (Y Pb Pr)
HDMI
VGA
-
OK
No
OK
DVI
OK
-
OK
No
Component (Y Pb Pr)
No
OK
-
OK
HDMI
OK
No
OK
-
OSD Menu
Description