Marantz Portable Solid State Recorder User Manual

 (REMOTE1 jack only)

Use a wired remote (not supplied) to control the
PMD671. There are five remote modes:

• StartPause – during recording or playback,

switch off to pause and on to resume (record-
ing on the same track).

• StrtStp TR - during recording, switch off to

pause recording and on to start recording a
new track.

• EDL Mark – during recording, switch remote

to on to add an EDL mark.

• PWR REC – during power off, switch remote

on to turn power on and begin recording.
During recording, switch remote off to stop
recording and power off.

• Manual TRK – during recording, switch

remote on to increment the track. Recording
continues with a new track created at that
point.

Default is StartPause.

Press & hold 

MENU/STORE 2 sec ....... Preset

Double Click ENTER 

.................. RecFormat

Press F.FWD/+ 

 until ......................... Remote

Press ENTER 

........... StartPause/StrtStp TR/

............... EDL Mark/PWR REC/Manual TRK

Press F.FWD/+ 

............... tab Remote Modes

Press ENTER 

................................... Remote

Press 

MENU/STORE .................... store & exit

peatedly until
Remote is dis-
played and
flashing.

accept the
Remote choice
and switch to
RemoteMode choices.

4. Press and release the F.FWD/+ button 

 or

the -/F.REV
button 

 to tab

through the
RemoteMode choices: StartPause, StartStp
TR, EDL Mark, PWR REC, or Manual TRK.

5. When correct,

press and release
the ENTER

button

 to switch to RemoteMode flashing.

You can:
•

Press and release the F.FWD/+ button 

 or the -/

F.REV button

 to tab to another menu choice, or

•

Press and release the  

MENU/STORE button to write

the menu changes and return to stop mode, or

•

Press and release the CANCEL button 

 to cancel all

menu changes and return to stop mode.

Broadcast Wave Format (.bwf) has three identifi-
cation numbers in the header (Extension Chunk):
Description, Originator, and Originator Reference.
For example, if the IDs are used for a broadcast
station ID1 could be the identifier of the station,
ID2 could be used for the department code, and
ID3 for the badge number of the reporter.

Default is all ID numbers at 000000.

Press & hold 

MENU/STORE 2 sec ....... Preset

Double Click ENTER 

.................. RecFormat

Press F.FWD/+ 

 until ..................... ID1Dscrpt

................................. ID2Origin or ID3OrgRef

Press ENTER 

..................... 1st digit flashing

  Press F.FWD/+ 

.............................. tab 0-9

  Press ENTER 

................. save & next digit

Repeat a, b until ................................ 6th digit set
Press ENTER 

............................... ID1Dscrpt

................................. ID2Origin or ID3OrgRef

Press 

MENU/STORE .................... store & exit

1. Select the RemoteMode menu choice:

a. From stop, press and hold the 

MENU

button for about 2 seconds. Preset will appear

b. While Preset is flashing, double click the

ENTER button 

.

The last Menu
choice selected
will appear.

2. Press and release the F.FWD/+ button 

re-

3. Press and release the ENTER button 

 to

(flashing) in the
display.