Nvidia 2 User Manual
34
Sync and Connection Status for the Genlock Server
Sync Status
Receiving - Green indicates that a sync pulse is present.
House - Green indicates that a signal is present at the BNC
House - Green indicates that a signal is present at the BNC
connector
Timing - Indicates whether the timing is locked to the sync signal
Green: The timing is locked to the house sync.
Grey: The timing is locked to the internal V-Sync.
Red: The display is not synchronized to the timing signal
Grey: The timing is locked to the internal V-Sync.
Red: The display is not synchronized to the timing signal
Stereo - Always green indicates that it is in sync with a timing signal.
Port Status
Out/Out is the normal indicator for the server device.
In/In indicates that the system is not selected as a server or client
In/In indicates that the system is not selected as a server or client
and is not frame-lock enabled.
How To Set Up Frame
Lock
Set Up the Hardware
Daisy chain the graphics cards together using a standard CAT5 patch
cable plugged into the external RJ45 connector.
cable plugged into the external RJ45 connector.
You can connect to any of the two RJ45 connectors located on
the G-Sync II card bracket.
the G-Sync II card bracket.
Each connector automatically confi gures itself as an input or
output after all the connections are made and one system is
confi gured as a synchronization server. A fl ashing green LED
indicates an input and a fl ashing yellow LED indicates an output.
If there is no server assigned and connected, then both LEDs are
a steady green.
output after all the connections are made and one system is
confi gured as a synchronization server. A fl ashing green LED
indicates an input and a fl ashing yellow LED indicates an output.
If there is no server assigned and connected, then both LEDs are
a steady green.
¾
¾
¾
¾
¾
¾
¾
¾
1.
NVIDIA Quadro G-Sync II User Guide