Nortel Networks 311 User Manual
146
NT1R20 Off-Premise Station Analog Line card
Figure 24
OPS analog line card - jumper block locations
OPS analog line card - jumper block locations
Each line interface unit on the card is equipped with two jumper blocks that
are used to select the proper loop current depending upon loop length.
See
are used to select the proper loop current depending upon loop length.
See
. For units
connected to loops of 460 to 2300 ohms, both jumper blocks must be
installed. For loops that are 460 ohms or less, jumper blocks are not
installed.
installed. For loops that are 460 ohms or less, jumper blocks are not
installed.
shows the location
of the jumper blocks on the OPS analog line card.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.