Nortel Networks 311 User Manual
Installation
287
Figure 60
LEI card - connecting two or more cards to the MMI
LEI card - connecting two or more cards to the MMI
Terminal configuration
For the MMI terminal to be able to communicate to the LEI, the interface
characteristics must be set to:
characteristics must be set to:
•
speed – 1200 or 2400 bps
•
character width – 7 bits
•
parity bit – mark
•
stop bits – one
•
software handshake (XON/XOFF) – off
Software Configuration
Although much of the architecture and many features of the LEI card are
different from the analog line card, the LEI has been designed to emulate an
analog line card to the CS 1000 software. Because of this, the LEI software
configuration is the same as for two adjacent analog line cards.
different from the analog line card, the LEI has been designed to emulate an
analog line card to the CS 1000 software. Because of this, the LEI software
configuration is the same as for two adjacent analog line cards.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.