Nortel Networks 311 User Manual
462
NT7D16 Data Access card
C - Call M - Modify
D - Display
CTRL Z (Abort Keyboard Dialing)
Select: <SP>
D - Display
CTRL Z (Abort Keyboard Dialing)
Select: <SP>
Not in service
When the DAC attempts a call to a DN that is not supported, it sends you
a message. The call is released, and you must reenter the Autobaud
character <CR> to initiate keyboard dialing again.
a message. The call is released, and you must reenter the Autobaud
character <CR> to initiate keyboard dialing again.
C<CR>
ENTER NUMBER:<SP>
xxxxxxx<CR>
CALLING xxxxxxx
NOT IN SERVICE
RELEASED
No response from the system
Likewise, when the DAC receives no system response from your port after
a 30-second timeout period, the DAC sends you a message. The call is
abandoned. This means the port is either disabled or unequipped.
a 30-second timeout period, the DAC sends you a message. The call is
abandoned. This means the port is either disabled or unequipped.
C<CR>
ENTER NUMBER:<SP>
xxxxxxx<CR>
NO SYSTEM RESPONSE
RELEASED
Hayes dialing
Like keyboard dialing, Hayes dialing is an interactive dialing mode with the
terminating equipment connected to the NT7D16 Data Access Card (DAC).
In addition to the common parameters and functions, the Hayes dialing
mode offers the following features:
terminating equipment connected to the NT7D16 Data Access Card (DAC).
In addition to the common parameters and functions, the Hayes dialing
mode offers the following features:
•
Data call dialing
•
Two modes for answering incoming calls: auto and manual
•
Repeat previous command
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.