Omega OMB-DAQBOARD-3000 User Manual
Specifications –
DaqBoard/3000 Series
and
PDQ30
7
DaqBoard/3000 Series Specifications
I/O Comparison Matrix
Product or System
Analog Input
Channels
Input
Ranges
Analog
Output
Channels
Digital I/O
Channels
Counter
Inputs
Timer
Outputs
DaqBoard/3000
16SE / 8DE
7
2
24
4
2
DaqBoard/3001
16SE / 8DE
7
4
24
4
2
DaqBoard/3005
16SE / 8DE
7
0
24
4
2
DaqBoard/3006 16SE
only 1
0
24
4
2
DaqBoard/3000 with
PDQ30
64SE / 32DE
7
2
24
4
2
DaqBoard/3001
with PDQ30
64SE / 32DE
7
4
24
4
2
DaqBoard/3005
with PDQ30
64SE / 32DE
7
0
24
4
2
General Specifications
Power consumption (per board): 3 W
Operating temperature: 0 to +60°C
PCI Bus: PCI r 2.2 compliant, universal 3.3V to 5V signaling support
Storage temperature: -40 to +80°C
Relative Humidity: 0 to 95% non-condensing
Vibration: MIL STD 810E Category 1 and 10
Signal I/O Connector: 68-pin standard “SCSI type III” female connector
Dimensions: 165 mm W x 15 mm D x 108 mm H (6.5” x 0.6” x 4.2”)
Weight: 160 g (0.35 lbs)
Analog Inputs
Channels: 16 single-ended or 8 differential. Programmable on a
per-channel basis as single-ended or differential.
per-channel basis as single-ended or differential.
Expansion: An additional 48 analog inputs per board via optional PDQ30 module.
Expansion channel features are identical to those of the board main channels.
Expansion channel features are identical to those of the board main channels.
Expansion Connector: HDMI Connector
Expansion Cable: HDMI cable: CA-266-3 (3 ft.), or CA-266-6 (6 ft.)
Over-Voltage Protection: ±30V
Ranges: Software or sequencer selectable on a per-channel basis.
±10V, ±5V, ±2V, ±1V, ±0.5V, ±0.2V, ±0.1V
Input Impedance: 10M
Ω single-ended; 20MΩ differential
Total Harmonic Distortion: -80 db, typical for ±10V range, 1 kHz fundamental
Signal to Noise and Distortion: 72 db, typical for ±10V range, 1 kHz fundamental
Bias Current: 40pA typical (0°C to 35°C)
Crosstalk: -75 db DC to 60 Hz; -65 db @10 kHz, typical
Common Mode Rejection: -70 dB typical DC to 1 kHz
Common Mode Rejection: -70 dB typical DC to 1 kHz
Except DaqBoard/3006, which is limited to 16 single-ended analog inputs with a fixed range of ±10V.
OEMs can contact the factory for other range configurations.
OEMs can contact the factory for other range configurations.
Note: Specifications are subject to change without notice.
988093
Specifications - DaqBoard/3000 and PDQ30 7-1