NEC 5800/320MA User Manual
Index-1
Index
Index-
A
Adapter Fault Tolerance (AFT) teams, 2-10
adapters. See PCI adapters
Adaptive Load Balancing (ALB) teams, 2-10
AK533 attachment kit, 1-3
adapters. See PCI adapters
Adaptive Load Balancing (ALB) teams, 2-10
AK533 attachment kit, 1-3
C
cables of PCI adapters
embedded Ethernet adapters, 2-5
Fibre Channel optical, 3-2, 3-5
U525 and U526 PCI adapters, 3-2, 3-5
U575 PCI adapters, 2-2, 2-5
Fibre Channel optical, 3-2, 3-5
U525 and U526 PCI adapters, 3-2, 3-5
U575 PCI adapters, 2-2, 2-5
cards
See PCI adapters
CLARiiON storage systems
D
data rate of Ethernet PCI adapters, 2-16
diagnostic tests in PROSet, 2-41
drivers for PCI adapters
diagnostic tests in PROSet, 2-41
drivers for PCI adapters
Ethernet drivers, 2-4
Fibre Channel drivers, 3-4
ql2310.sys, 3-4
U525 and U526 PCI adapters, 3-4
U574 and U575 adapters, 2-4
Fibre Channel drivers, 3-4
ql2310.sys, 3-4
U525 and U526 PCI adapters, 3-4
U574 and U575 adapters, 2-4
duplex mode
E
embedded Ethernet PCI adapters
fault-tolerant teams, 2-9
LEDs on ports, 2-36, 2-37
teaming ports in same enclosure, 2-14
troubleshooting, 2-35
LEDs on ports, 2-36, 2-37
teaming ports in same enclosure, 2-14
troubleshooting, 2-35
adding adapters to existing, 2-31
adding VLANs, 2-22
assigning IP address, 2-24
configuring primary adapters, 2-20, 2-29,
adding VLANs, 2-22
assigning IP address, 2-24
configuring primary adapters, 2-20, 2-29,
configuring teams, 2-14, 2-18
configuring with third-party adapters, 2-14
Ethernet address, 2-9
express teams not supported, 2-14
MAC address, 2-9
maximum number of teams, 2-14
multicasting restriction, 2-12
network filtering, 2-28
network statistics, 2-38
primary adapter, 2-9
receive load balancing property, 2-10
removing adapters from existing, 2-28
removing team, 2-34
replacing primary adapter, 2-32
restrictions and recommendations, 2-14
restrictions when modifying existing, 2-28
secondary adapter, 2-9
teaming ports in same adapter, 2-14
types of teams, 2-9
updating Ethernet (MAC) address, 2-32
verifying configuration, 2-23
configuring with third-party adapters, 2-14
Ethernet address, 2-9
express teams not supported, 2-14
MAC address, 2-9
maximum number of teams, 2-14
multicasting restriction, 2-12
network filtering, 2-28
network statistics, 2-38
primary adapter, 2-9
receive load balancing property, 2-10
removing adapters from existing, 2-28
removing team, 2-34
replacing primary adapter, 2-32
restrictions and recommendations, 2-14
restrictions when modifying existing, 2-28
secondary adapter, 2-9
teaming ports in same adapter, 2-14
types of teams, 2-9
updating Ethernet (MAC) address, 2-32
verifying configuration, 2-23
Ethernet PCI adapters