Motorola HC12 User Manual
User’s Manual
MCUez HC12 Assembler
282
Assembler Messages
MOTOROLA
Assembler Messages
12.3.42 A2336: Value too Big
Type:
Warning
Description:
The absolute expression specified as the initialization value for
a block, defined using DCB, is too big. This message is
generated when the initial value specified in a DCB.B directive
cannot be coded on a byte. In this case, the value used to
initialize the constant block will be truncated to a byte value.
a block, defined using DCB, is too big. This message is
generated when the initial value specified in a DCB.B directive
cannot be coded on a byte. In this case, the value used to
initialize the constant block will be truncated to a byte value.
Example:
constSec: SECTION
…
label1: DCB.B 2, 312
…
In the previous example, the constant block is initialized with
the value $38 (= 312 and $FF).
the value $38 (= 312 and $FF).
Tip:
To avoid this warning, modify the initialization value to a byte
value.
value.
Example:
constSec: SECTION
…
label1: DCB.B 2, 56
…