Motorola MVME162 User Manual

MVME162IG/D2A-1

 [;[I][M]] 

This command is used to display and configure the board information block. 
This block is resident within the Non-Volatile RAM (NVRAM). Refer to the 
MVME162 Embedded Controller User’s Manual for the actual location. The 
information block contains various elements detailing specific operation 
parameters of the hardware. The MVME162 Embedded Controller User’s Manual 
describes the elements within the board information block, and lists the size 
and logical offset of each element. The CNFG command does not describe the 
elements and their use. The board information block contents are 
checksummed for validation purposes. This checksum is the last element of 
the block.

Although the factory fills all fields except the IndustryPack fields, only these 
fields MUST contain correct information:
❏

MPU clock speed

❏

Ethernet address

❏

Local SCSI identifier

Example: to display the current contents of the board information block.

162-Bug>

 

Board (PWA) Serial Number = "000000061050" 

Board Identifier          = "MVME162-03      " 

Artwork (PWA) Identifier  = "01-W3814B03A    " 

MPU Clock Speed           = "2500" 

Ethernet Address          = 08003E20A867 

Local SCSI Identifier     = "07" 

Parity Memory Mezzanine Artwork (PWA) Identifier  = "        " 

Parity Memory Mezzanine (PWA) Serial Number       = "        " 

Static Memory Mezzanine Artwork (PWA) Identifier  = "        " 

Static Memory Mezzanine (PWA) Serial Number       = "        " 

ECC Memory Mezzanine #1 Artwork (PWA) Identifier  = "        " 

ECC Memory Mezzanine #1 (PWA) Serial Number       = "        " 

ECC Memory Mezzanine #2 Artwork (PWA) Identifier  = "        " 

ECC Memory Mezzanine #2 (PWA) Serial Number       = "        "