Motorola MVME162 User Manual
Debugger General Information
3-22
MVME162 Embedded Controller Installation Guide
3
Manufacturing Test Process
During the manufacturing process for MVME162 modules, the manufacturing
test parameters and testing state flags are stored in NVRAM. These strings are
installed during the manufacturing process and result in the product
performing manufacturing tests. None of these tests harm the product or
system into which a module is installed. Entering an ASCII break on the
console port from a terminal terminates these tests.
test parameters and testing state flags are stored in NVRAM. These strings are
installed during the manufacturing process and result in the product
performing manufacturing tests. None of these tests harm the product or
system into which a module is installed. Entering an ASCII break on the
console port from a terminal terminates these tests.
The two state flags that start the test processes are:
FLASH EMPTY$00122984
and
Burnin test$00000000
If either string is in the first location of NVRAM ($FFFC0000), the test process
starts.
This note is to inform users about the manufacturing test process; it is not
intended to instruct customers in its use. Motorola reserves the right to delete,
change, or modify this process.
starts.
This note is to inform users about the manufacturing test process; it is not
intended to instruct customers in its use. Motorola reserves the right to delete,
change, or modify this process.