Motorola MVME187 User Manual

A-4

Configure and Environment Commands

The parameters to be configured are listed in the following table:

Bug or System environment [B/S]

S

System Mode

Field Service Menu Enable [Y/N]

Y

Display Þeld service menu.

Remote Start Method Switch 
[G/M/B/N]

B

Use both the Global Control and 
Status Register (GCSR) in the 
VMEchip2, and the Multiprocessor 
Control Register (MPCR) in shared 
RAM, methods to pass and start 
execution of cross-loaded program. 

Probe System for Supported I/O 
Controllers [Y/N]

Y

Accesses will be made to VMEbus to 
determine presence of supported 
controllers. 

Negate VMEbus SYSFAIL* 
Always [Y/N]

N

Negate VMEbus SYSFAIL after 
successful completion or entrance into 
the bug command monitor. 

Local SCSI Bus Reset on Debugger 
Startup [Y/N]

N

Local SCSI bus is not reset on 
debugger startup. 

Local SCSI Bus Negotiations Type 
[A/S/N]

A

Asynchronous.

Ignore CFGA Block on a Hard 
Disk Boot [Y/N]

Y

Enable the ignorance of the 
ConÞguration Area (CFGA) Block on 
a hard disk.

Auto Boot Enable [Y/N]

N

Auto Boot function is disabled.

Auto Boot at power-up only 
[Y/N]

Y

Auto Boot is attempted at power-up 
reset only. 

Auto Boot Controller LUN

00

LUN of a disk/tape controller module 
currently supported by the Bug. 
Default is 00. 

Auto Boot Device LUN

00

LUN of a disk/tape device currently 
supported by the Bug. Default is 00.