Motorola MVME187 User Manual
3-2
Hardware Preparation and Installation
3
Overview of Startup Procedure
The following list identifies the things you will need to do before
you can use this board, and where to find the information you need
to perform each step. Be sure to read this chapter and all Caution
notes, and have the related documentation with you before you
begin.
you can use this board, and where to find the information you need
to perform each step. Be sure to read this chapter and all Caution
notes, and have the related documentation with you before you
begin.
Table 3-1. Startup Overview
Stage
What you will need to do...
Refer to...
On
page...
1
Prepare the MVME187.
Ensure that EPROM devices are properly
installed in their sockets.
installed in their sockets.
ConÞgure adapters and MVME712X
transition modules.
transition modules.
The userÕs manual you
received with your
MVME712X module
received with your
MVME712X module
Install/remove jumpers on headers.
2
Prepare the chassis.
Turn power off to chassis and peripherals. The userÕs
manual you
received with
your chassis
received with
your chassis
Disconnect AC power cable.
Remove chassis cover.
Remove Þller panels from card slots.
3
Install your MVME187 in the chassis.
Remove IACK and BG jumpers from
backplane.
backplane.
Slide the module into the chassis and
fasten it securely.
fasten it securely.