NEC uPD75P3116 User Manual

1994

DATA SHEET

The

µPD75P3116 replaces the µPD753108’s internal mask ROM with a one-time PROM, and features expanded

ROM capacity.

Because the

µPD75P3116 supports programming by users, it is suitable for use in evaluation of systems in the

development stage using the

µPD753104, 753106, or 753108, and for use in small-scale production.

Detailed information about functions is provided in the following User’s Manual. Be sure to read it before

designing:

µPD753108 User’s Manual: U10890E

FEATURES

Compatible with

µPD753108

Memory capacity:

• PROM: 16384

× 8 bits

• RAM:

512

× 4 bits

Can be operated in same power supply voltage range as the mask version

µPD753108

• V

= 1.8 to 5.5 V

On-chip LCD controller/driver

QTOP

microcontroller

Remark QTOP microcontrollers are microcontrollers with on-chip one-time PROM that are totally supported by NEC.

This support includes writing application programs, marking, screening, and verification.

ORDERING INFORMATION

Part Number

Package

µPD75P3116GC-AB8

64-pin plastic QFP (14

× 14)

µPD75P3116GK-8A8

64-pin plastic LQFP (12

× 12)

µPD75P3116GC-8BS

64-pin plastic LQFP (14

× 14)

Caution This device does not provide an internal pull-up resistor connection function by means of mask

option.

PD75P3116

MOS INTEGRATED CIRCUIT

4-BIT SINGLE-CHIP MICROCONTROLLER

The mark

shows major revised points.

Document No.

U11369EJ3V0DS00 (3rd edition)

Date Published March 2002 N CP(K)
Printed in Japan

The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.

Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.