Nu Technology cPCI-6760DK/P5 User Manual
38
•
Driver Installation
4
Driver Installation
To install the drivers and utility for the cPCI-6760DK/P5, please refer the
installation information in this Chapter. We provide basic information in this
manual, however, for more detail installation information, such as
non-Windows OS installation, please refer to the extensive explanation
inside the ADLINK CD. We put the chip drivers in the following directories:
installation information in this Chapter. We provide basic information in this
manual, however, for more detail installation information, such as
non-Windows OS installation, please refer to the extensive explanation
inside the ADLINK CD. We put the chip drivers in the following directories:
Chipset driver
\CHIPDRV\Chipset\440BX
VGA/AGP relative driver
\CHIPDRV\VGA\SM721
LAN relative driver
\CHIPDRV\LAN\100PDISK
Watchdog relative library
\CHIPDRV\WDT
Hardware Doctor Utility
\Utility\HWDoctor\W8378X
In this users manual, the Bus-mastering IDE driver installation is not
described because most of the Windows based OS will install those drivers
automatically.
described because most of the Windows based OS will install those drivers
automatically.
Since Windows NT is a non plug-and-play OS, some useful tips for installing
Windows NT drivers are suggested:
Windows NT drivers are suggested:
1. Install the LAN driver before installing any service pack.
2. Install the VGA/AGP driver after installing the service pack. Please
make sure your service pack does support AGP, service pack 6 or
higher is recommend.
higher is recommend.
3. If Windows NT boots with a warning message, check the Event
Viewer to view the source generating the warning message. If
strange phenomena’s occur and it can’t be solved, re-install the
Windows NT service pack, then install the drivers in a different
sequence.
strange phenomena’s occur and it can’t be solved, re-install the
Windows NT service pack, then install the drivers in a different
sequence.