Yamaha DRCX User Manual
31
CHAPTER2 Ethernet Unit
2-12
Message List
2-12-1
Error messages
The following error messages involving the Ethernet system have been added.
Message
net link error
Cause
• TELNET connection terminated due to error.
• A TELNET dedicated parameter is set so as to stop operation during
logout processing.
• A TELNET dedicated parameter is set so as to stop operation during
logout processing.
Solution
• To end the TELNET communication use a LOGOUT or BYE
command.
• Make setting with a TELNET dedicated parameter so as to continue
operation during logout processing.
command.
• Make setting with a TELNET dedicated parameter so as to continue
operation during logout processing.
ERROR
MESSAGE
No. 38
2-12-2
Telnet message list
Message login:
Meaning
Request for entry of login user name.
Response
Enter user name.
Message Password:
Meaning
Request for entry of login password.
Response
Enter login password.
Message login
incorrect.
Meaning
Error was found during login check.
Response
Enter the correct user name and password.
Message
TELNET is disconnected!!
Meaning
Login check was made 3 times but errors were found so connection
was cutoff.
Response
Enter the correct user name and password.
Message
telnet is already used!!
Meaning
A TELNET connection has already been made.
Response
Limit the number of simultaneous logins to 1.
Message timeout.
Meaning
Continuous communication time exceeded the time set on the TELNET
parameter timeout (time).
Response
Set a larger timeout (time) on the TELNET parameter so communication
time does not exceed the timeout.