Soyo SY-K7ADA User Manual

Plug the connector from the power directly into the 20-pin male ATX PW

connector on the Motherboard, as shown in the following figure.

Warning: Follow these precautions to preserve your

Motherboard from any remnant currents when connecting to

ATX power supply:

The Motherboard requires a power supply with at least 200 Watts and a

"power good" signal. Make sure the ATX power supply can take at least

720 mA * load on the 5V Standby lead (5VSB) to meet the standard ATX

specification.

* Note: If you use the Wake-On-LAN (WOL) function, make sure the

ATX power supply can support at least 720 mA on the 5V Standby lead

(5VSB).

Please install the ATX power according to the following pin assignment:

®

 

®

ATX Power