Soyo SY-K7ADA User Manual

BIOS Setup Utility

SY-K7ADA

This is because the recorder and microphone in the Windows are not

enabled. Please go to sound properties and enable them.

Lock up (freeze)

When I boot up my system, everything works fine. It sees my CPU

and memory, detects my hard drive, floppy drive and CD-ROM but

locks up at "Verify DMI pool data... ", and it won’t go any further.

What should I do?

Please clear the CMOS ALi JP5 then choose 'load fail-safe default' in the

bios and save the bios and exit. Next, unplug all other add-on cards except

the video card and floppy drive controller, and see if it can boot from

floppy. Then put back the peripherals one by one to identify which one

causes the lockup.

I can not get my board to run properly.

Please make sure you have the latest bios and driver from the SOYO web

site at:

http://www.soyo.com

2-3.11 Power Off

There are two possible ways to turn off the system:

1. Use the Shutdown command in the Start Menu of Windows 95/98

to turn off your computer.

2. Press the mechanical power-button and hold down for over 4

seconds, to shutdown the computer. If you press the power-button for

less than 4 seconds, then your system will enter into Suspend Mode.

You are now ready to configure your system with the BIOS setup program.

Go to Chapter 3: BIOS SETUP