Soyo SY-K7ADA V1.0 User Manual

BIOS Setup Utility

SY-K7ADA V1.0

2-3.8 Quick BIOS Setup

This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu
combines the main parameters that you need to configure, all in one menu,
for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display
on screen. Follow these steps to configure the CPU settings.

Step 1.

Select [STANDARD CMOS SETUP]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“Auto”.

Step 2.

Select [LOAD SETUP DEFAULT]

Select the “LOAD SETUP DEFAULT” menu and type “Y” at the prompt
to load the BIOS optimal setup.

Step 3.

Select [SAVE & EXIT SETUP]

Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.