Soyo SY-K7ADA V1.0 User Manual
BIOS Setup Utility
SY-K7ADA V1.0
73
PNP/PCI Configuration Setup (Continued)
PNP/PCI
Setup
Setup
Setting
Description
Note
Your OS may reassign another interrupt to a PCI slot after BIOS passes control to
the OS, especially if you use Windows 95, 98 or NT.
the OS, especially if you use Windows 95, 98 or NT.
Disabled Leave this field at Disabled. Default
PCI/VGA
Palette
Snoop
Palette
Snoop
Enabled
Disabled BIOS will assign IRQ for
VGA/USB port.
Assign IRQ
For
VGA/USB
For
VGA/USB
Enabled BIOS won’t assign IRQ for
VGA/USB port.
Default
Edge
Level
Default
PCI IRQ
Active By
Active By
This item allow you to
determine which win
ACTIVATE PCI IRQ.
determine which win
ACTIVATE PCI IRQ.
3-6.2 MULTI I/O ADDRESSES
Default settings for multi-I/O addresses are as follows:
Port
I/O Address
IRQ
Status
LPT1
378H 7 ECP/EPP
COM1
3F8H 4
COM2
2F8H 3
Warning: If a default I/O address conflicts with other I/O cards
such as sound card, you must change one of the I/O addresses to
remedy to this address conflict. (I/O addresses can be adjusted from
the BIOS Setup Utility)
such as sound card, you must change one of the I/O addresses to
remedy to this address conflict. (I/O addresses can be adjusted from
the BIOS Setup Utility)