Casio DQ-970 Leaflet

2

The alarm sounds when the alarm time you set is reached. You can also use the 

 selector (

2

) to

select the snooze alarm feature.

Use the 

 and 

 buttons (

3

) to set the alarm time.

Pressing the 

 and 

 buttons (

3

) causes the alarm time to appear

in place of the date on the display.

•

Holding down 

 or

 changes the digits at high speed.

Use the 

 selector (

2

) on the side of the clock to turn the alarm on and off, and to select the snooze

feature.

•

The alarm time appears in place of the date on the display whenever the 

 selector (

2

) is set to ON

or SNZ.

•

The light also turns on for the first four seconds that the alarm sounds.

•

The alarm sound changes over four levels as it sounds.

•

When alarm is sounding, press the 

 button (

1

) to stop it. When the snooze feature is turned on,

the alarm will sound again in about five minutes.

•

To turn off the snooze feature, slide the 

 selector (

2

) to OFF.

Pressing the 

 button (

1

) turns on the light and illuminates the display for easy reading in the dark.

•

Overuse of the light can shorten battery life.

•

A built-in sensor measures temperature and shows the measured value on the display.

•

The temperature display shows “LO” for temperatures below –50

°

C (–58

°

F) and “HI” for temperatures above

70

°

C (158

°

F).

•

Though temperature readings are displayed up to 0

°

C (32

°

F) and greater than 41

°

C (105

°

F), note that such

readings are actually outside the guaranteed temperature range of this clock.

•

Push the 

°

°

 button (

4

) to select either Celsius (

°

C) or Fahrenheit (

°

F).

°C/°F

 button (

4

)

°

C

°

F

°C)

°F)

°C/°F

Press 

 to 

change the 
alarm time 
setting.

Press 

 to 

change the 
alarm time 
setting.

The alarm sounds at the preset time for one minute, and up to seven more times every
five minutes thereafter. Even if you stop the alarm by pressing the 

 button

(

1

), the alarm sounds again five minutes later.

•

The indicator   flashes on the display to indicate that the snooze feature is activated.

The alarm sounds at the preset time for one minute.

The alarm does not sound.

A built-in sensor measures humidity and shows the measured value on the display.

•

The humidity display shows “LO” for humidity below 10% and “HI” for humidity above 90%.

Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove all of the old batteries.
3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct

directions. If you load batteries incorrectly, they can burst and damage the clock.

4. Press the 

button (

6

). Be sure to press the 

button (

6

) after replacing batteries.

5. Replace the battery compartment cover.

•

Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician
immediately.

•

Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.

•

Never mix old and new batteries, or batteries of different brands.

•

Never charge the batteries that come with the clock.

•

Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.

•

Replace the batteries at least once a year, even if the current batteries are working properly.

•

The batteries that come with the clock lose some of their power during transport and storage.