Casio G486VPB User Manual
G486VPB
45
Installing the System Board
Before installing the system board into your system unit,
you should prepare the tools you will need:
you should prepare the tools you will need:
You will need:
• one medium size, flat-bladed screwdriver
• one medium Phillips screwdriver
• one grounded wriststrap for electrostatic
• one medium Phillips screwdriver
• one grounded wriststrap for electrostatic
discharge protection
Step 1
Unlock your system unit. Turn off the power and dis-
connect all power cords and cables.
connect all power cords and cables.
Step 2
Remove the system unit cover. Refer to the manufac-
turer’s instructions if necessary.
turer’s instructions if necessary.
Step 3
Wear the grounded wriststrap, remove all expansion
cards and detach all connectors from the old system
board.
cards and detach all connectors from the old system
board.
Step 4
Loosen the screws holding the original system board and
remove the board from the system. Save the screws.
remove the board from the system. Save the screws.