Buffalo Technology TS-RXL User Manual

TeraStation User Manual

66

An UPS (Uninterruptible Power Supply) can protect the TeraStation from power outages and brownouts.  To use the 

TeraStation with a UPS, proceed as follows:

Plug the power cable of the UPS to a wall socket.

Connect the AC cable of the TeraStation to the UPS.

Connect the UPS to the TeraStation with a USB or serial connection.

Note: 

• TS-XEL series TeraStations do not have UPS Port.  

Turn on the UPS, then the TeraStation.

In the Web Admin interface, click [System] - [Power Management] - [UPS Settings].

Click [Modify Settings].

Notes: 

•  If the UPS has shut down the TeraStation because of a power outage, make sure that power has been restored before 

restarting the TeraStation.  If the TeraStation is restarted after a shutdown, but power is not available, then the UPS 

will not shut down the TeraStation a second time even if its battery is running low.  

 •  If the TeraStation is set to use UPS recovery, then the UPS will restart the TeraStation when normal power is restored.

Check [Enable].

Configure the desired settings.

Click [Save].