Soyo SOYOTM User Manual

The Integrated Peripherals option changes the values of the chipset
registers.  These registers control system options in the computer.

Run the Integrated Peripherals as follows.

1.

Choose ÒIntegrated PeripheralsÓ from the Main Menu and the
following screen appears.  (The screen below shows default
settings:)

ROM PCI/ISA BIOS

INTEGRATED PERIPHERALS

AWARD SOFTWARE, INC.

ESC : Quit       

↑  ↓  →  ←

: Select Item

F1  : Help       PU/PD/+/– : Modify
F5  : Old Values (Shift)F2 : Color
F6  : Load BIOS Defaults
F7  : Load Setup Defaults

IR Transmission Delay    : Enabled
IR IRQ Select            : IRQ4
(FIR Mode Use DMA        : 0)
Onboard Parallel Port

: 378/IRQ7

Parallel Port Mode

     : ECP+EPP

ECP Mode Use DMA

: 3

EPP Mode Select          : EPP1.9

IDE HDD Block Mode        : Enabled
IDE Primary Master PIO    : Auto
IDE Primary Slave PIO     : Auto
IDE Secondary Master PIO  : Auto
IDE Secondary Slave PIO   : Auto
IDE Primary Master UDMA   : Auto
IDE Primary Slave UDMA    : Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA  : Auto
On-Chip Primary   PCI IDE : Enabled
On-Chip Secondary PCI IDE : Enabled
PCI Slot IDE 2nd Channel  : Disabled
USB Keyboard Support

 : Enabled

Onboard FDC Controller   : Enabled
Onboard Serial Port 1    : 3F8/IRQ4

Onboard Serial Port 2    : 2F8/IRQ3
Onboard IR Controller    : Enabled
IR Address Select        : 2F8H
IR Mode                  : IrDA

2.

Use the arrow keys to move between items and select values.
Modify selected fields using the PgUp/PgDn/+/Ð keys.

A short description of screen items follows:
IDE HDD Block Mode

Choose Enabled (default) or Disabled.
Enabled invokes multi-sector transfer
instead of one sector per transfer. Not all
HDDs support this function.

Choose Auto (default) or mode 0~4.
Mode 0 is the slowest speed, and HDD
mode 4 is the fastest speed. For better
performance and stability, we suggest
you use the Auto setting to set the HDD
control timing.