Soyo 6KB82440 User Manual
42
Quick Installation Guide
Memory Configurations
DIMM BANKS
DIMM1
DIMM2
DIMM3
DIMM4
RAM Type
EDO/SDRAM
Size
8/16/32/64/128
Note: This mainboard requires 3.3V DIMM with an access time of 70ns
or less, it supports memory size from 8 to 512MB and you may use
any combination of DIMMs in the banks.
any combination of DIMMs in the banks.
Connectors and Jumper Settings
CMOS clear: JP5
ATX Power Supply: ATX
CPU Cooling Fan: FAN
Retain CMOS
1-2
please insert the ATX power supply
pin
1
2
3
data (default)
plug into this header.
function
GND
12V
sensor
wake on LAN jumper: J44
RST
IDE Led
Clear CMOS data
2-3
Please connect the WOL cable from
your LAN card to this jumper.
your LAN card to this jumper.
Connect the reset
button to this
jumper.
button to this
jumper.
Connect the HDD
led to this jumper.
led to this jumper.
USB1 and 2
PRT
SPK
Keylock
Connect your USB devices to these headers
printer cable header
Connect the cable
Connect keyboard
ATX Power Supply On/Off Switch: PWRBT
of speakers to
lock switch to this
Connect your power switch to this jumper (momentary switct type).
this jumper
jumper
IrDA (Infrared Devices Connector: IR
TB Led
PW Led
pin
1
2
3
4
5
Connect your
Connect the
function
Vcc
FIRRX
IRRX
GND
IRTX
Turbo led to this
jumper.
jumper.
power led to this
jumper.
jumper.
Default I/O Settings
PORT
I/O Address
IRQ
Functionality
LPT1
378H
7
ECP + EPP
COM1
3F8H
4
Ð
COM2
2F8H
3
Ð
Note: If the default I/O settings conflict with those of other I/O cards,
such as soundcards you will have to adjust the settings of one of
them. The default settings for the onboard I/O can be changed in
the BIOS setup. Enter BIOS Setup by pressing <Delete> key
during boot-up. The I/O settings can be found under ÒIntegrated
PeripheralsÓ.
them. The default settings for the onboard I/O can be changed in
the BIOS setup. Enter BIOS Setup by pressing <Delete> key
during boot-up. The I/O settings can be found under ÒIntegrated
PeripheralsÓ.