Soyo SY-5S User Manual

Chapter 2 

In addition to the Installation Guide, this section is designed to help

you configure the mainboard hardware and to provide

complementary knowledge of the hardware. (This chapter is

designed for Normal edition mainboard use only.)

Warning: Turn off the power to the mainboard, system

chassis, and peripheral devices before performing any

work on the mainboard or system.

After you install the mainboard:

1. Set the Voltage Type jumper JP17

2. Select the CPU voltage with jumper JP30

3. Select the CPU frequency with jumpers JP10~16

4. For Cyrix CPUs only, set the CPU burst mode jumper JP22

5. Set the onboard sound options with jumpers J2, J4, J5

6. Attach the Wake-On-LAN Connector JP44 (optional)

7. Set the CMOS clear jumper JP5

8. Install memory

9. Make case connections

Refer to this chapter whenever you upgrade or reconfigure your

system.