Soyo SY-5S User Manual
BIOS Setup Utility
SY-5STM
63
3-8.2 FDC Controls
FDC Controls
FDC Controls
Setting
Description
Note
Disabled
Turn off the on-board
floppy controller
floppy controller
Onboard FDC
controller
controller
Enabled
Use the on-board
floppy controller
floppy controller
Default
3-8.3 Onboard Serial Ports
Onboard Serial
Ports
Onboard Serial
Ports
Setting
Description
Note
Disabled
3F8/IRQ4
3F8/IRQ4
Default
(port 1)
(port 1)
2F8/IRQ3
Default
(port 2)
(port 2)
3E8/IRQ4
2E8/IRQ3
2E8/IRQ3
Onboard UART 1
Onboard UART 2
Onboard UART 2
Auto
Choose serial port 1 &
2's I/O address.
Do not set port 1 & 2 to
the same address
except for Disabled or
Auto.
2's I/O address.
Do not set port 1 & 2 to
the same address
except for Disabled or
Auto.
Standard
Supports a serial
infrared IrDA.
infrared IrDA.
Default
HPSIR
Supports HP serial
infrared interface
format.
infrared interface
format.
Onboard UART 2
Mode
Mode
ASKIR
Supports a Sharp
serial interface format.
serial interface format.
If [Onboard UART 2 Mode] is set to [HPSIR] or [ASKIR]
Half
Use this setting
Default
IR Duplex Mode
Full
IR-RX2TX2
Use this setting
Default
Use IR Pins
IR-RX TX