Soyo SY-5S User Manual

3. In “ Unpack & Copy ADI 4.2 Drivers”  screen, key in the

“drive:\directory” where these drivers will reside (default

C:\ADI43). The program will unpack and copy all related driver

files to the designation you assign.

4. After unpack and copy and complete, exit the INSTDRV.EXE

program.

5. Refer to Sec.1.2.2 to SEC. 1.2.5 for the installation procedures

of each program.

1. The following procedures assume that

Ø You have completed the “unpack & copy” procedure.

Ø Your ADI 4.2 drivers are located in C:\ADI42.

2. Add the following setting to your own batch file for AutoCAD R11

(i.e. ACADR11.BAT) or to your AUTOEXEC.BAT file:

SETDSPADI=\ADI42\RCPSIS.EXP <Enter>

3. Delete the configuration file ACAD.CFG that resides in the

\ACAD directory.

4. Type ACADR11 <Enter> to configure your AutoCAD R11

system.

5. In “ Select Display Device:” item, choose “ADI P386 V4.0/4.1

display”.

6. In “ Select Display Resolution”  screen, choose which display

driver you want to use.

7. Perform the listed instructions on the screen and the system will

start with the selected display setting.