Soyo SY-7IS2 User Manual

If the system does not boot-up properly, the Voice Doctor will

inform the user by voice through internal/external speaker at

what point in boot-up sequence the problem arises.

Below are the possible errors the user may encounter:

1. The Processor might be damage or not installed properly

2. The memory module might be damage or not installed

properly

3. No Keyboard connected

4. VGA card might be damage or not inserted properly

5. Defective HD-Driver (IDE)

6. Floppy might havean error

Voice Doctor supports two language, refer the table below on the

language you prefer.

In some cases the CMOS memory may contain wrong data, follow the

steps below to clear CMOS memory.

1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper

JP5. This jumper can be easily identified by its white colored cap.

2. Then put the jumper back to 1-2 to allow writing of new data into the

CMOS memory.

Short pin 2-3 for

at least 5

seconds to clear

the CMOS

Short pin 1-2

to retain new

settings

1 2 3

1 2 3

1 2 3

1 2 3