Intel S845WD1-E User Manual

 

Table 23.  Primary/Secondary IDE Master/Slave Submenus (continued) 

PIO Mode 

(Note) 

(This feature is present 
only when Type is not 
set to Auto.) 

•  Auto (default) 
•  Mode 0 
•  Mode 1 
•  Mode 2 
•  Mode 3  
•  Mode 4 

Specifies the PIO mode. 

Ultra DMA 

(This feature is present 
only when Type is not 
set to Auto.) 

•  Disabled (default) 
•  Mode 0 
•  Mode 1 
•  Mode 2  
•  Mode 3 
•  Mode 4 
•  Mode 5 

Specifies the Ultra DMA mode for the drive. 

Cable Detected 

(Note)

 

No options 

Displays the type of cable connected to the IDE 
interface:  40-conductor or 80-conductor 
(for ATA-66/100 devices). 

Note: 

These configuration options appear only if an IDE device is installed. 

To access this menu, select Advanced on the menu bar, then Diskette Configuration. 

 

Maintenance 

Main 

Security 

Power 

Boot 

Exit 

 PCI 

Configuration 

 Boot 

Configuration 

 Peripheral 

Configuration 

 IDE 

Configuration 

 

 

Event Log Configuration 

 

The submenu represented by Table 24 is used for configuring the diskette drive. 

Diskette Controller 

•  Disabled 
•  Enabled (default) 

Disables or enables the integrated diskette 
controller. 

Floppy A 

•  Not Installed 
•  360 KB 

5¼" 

•  1.2 MB 

5¼" 

•  720 KB 

3½" 

•  1.44/1.25 MB  3½" (default) 
•  2.88 MB 

3½" 

Specifies the capacity and physical size of 
diskette drive A. 

continued 

Configuration Software and Utilities 

 

71