Lucent Technologies partner voice messaging card User Manual
Line Coverage
Refer to Form A, Page 1, Line Coverage, VMS-Mail:
1.
If check marks appear for any lines in this column, use the procedure in
"Group Call Distribution" below.
"Group Call Distribution" below.
2.
If extension numbers are specified for any lines in this column, use the
procedure in "Line Coverage Extension" below.
procedure in "Line Coverage Extension" below.
Group Call Distribution (#206)
To assign VMS-Mail lines checked on Form A Page 1, Line Coverage, to Hunt
Group
7:
1 .
2 .
3 .
4 .
5 .
6 .
7 .
8 .
Press [
#
] [
2
] [
0
] [
6
].
At the
Group:
prompt, press [
7
].
At the
Line:
prompt, enter the first line checked in the VMS-Mail column.
Press [
Next Data
] until the display reads
3 VMS Line Cover.
To program another line, press [
Next Item
] or [
Prev Item
] until the appropriate line
number displays.
Press [
Next Data
] until the display reads
3 VMS Line Cover.
Repeat Steps 5 and 6 for each VMS-Mail line checked on Form A.
If extension numbers are specified for any lines in this column, use the fol-
lowing procedure in "Line Coverage Extension." Otherwise, continue with
the section "Automatic VMS Cover."
lowing procedure in "Line Coverage Extension." Otherwise, continue with
the section "Automatic VMS Cover."
Line Coverage Extension (#208)
To assign line coverage for the extension numbers specified in the VMS-Mail
column on Form A, Page 1, Line Coverage:
1 .
2 .
Press [
#
] [
2
] [
0
] [
8
].
At the
Line:
prompt, enter the first line for which an extension is specified
in the VMS-Mail column of Form A, Page 1, Line Coverage.