LevelOne WNC-0304USB User Manual

 

6 

 

 

 

 

 

 

The Icons on the LCD display are displayed as follows: 

 

1.  Operating Channel: Indicates the current operating channel of the detected Wi-Fi 

signal. 

2.  Number of AP’s Detected: the left digit indicates which detected Wi-Fi signal is 

currently displayed and the right digit indicates the total amount of Wi-Fi signals 

detected. 

3.  Encryption indicator: “WEP” for WEP encryption, “WPA” for WPA encryption, and 

“WPA2” for WPA2 encryption and “OPEN” indicates it is a non-encrypted signal. 

4.  “G” indicates the signal is a 802.11g wireless signal. “B” indicates the signal is a 

802.11b wireless signal. 

5.  Signal strength indicator with 5 bars indicating the signal strength. 

6.  “In” indicates the signal is an infrastructure mode signal, “Ad” indicates the signal is an 

Ad-hoc mode signal. 

7.  Battery indicator with 3 bars indicating battery power. When the indicator is empty, 

please recharge the detector by inserting it into PC’s USB port.   

8.  SSID Indicator: Displays the SSID of the detected Wi-Fi signal, if the SSID is too long 

the SSID indicator will scroll to display the complete SSID. 

 

4.  If the user wishes to re-scan/re-detect wireless SSID, just simply press “Seek/Lock” button 

once. If the user wishes to re-detect a specific discovered SSID, then the user has to hold 

down the “Seek/Lock” button for 4 seconds to enter “lock mode”. When the detector is in “lock 

mode” an icon with a capitalized “L” appears in the top middle corner of the screen.