Magma EB1H User Manual

Preface               v  

Before taking covers off a computer, perform the following steps: 

1.  Turn off the computer and any peripherals 

2.  Disconnect the computer and peripherals from their power 

sources to prevent electric shock or system board damage.  

3.  Disconnect any telephone or telecommunications lines from 

the computer.  

In addition, take note of these safety guidelines when appropriate: 

♦  To help avoid possible damage to systems boards, wait five 

seconds after turning off the computer before removing a 
component, removing a system board, or disconnecting a 
peripheral device from the computer.  

♦  When you disconnect a cable, pull on its connector or on its 

strain-relief loop, not on the cable itself. Some cables have a 
connector with locking tabs. If you are disconnecting this type 
of cable, press in on the locking tabs before disconnecting the 
cable.  As you pull connectors apart, keep them evenly aligned 
to avoid bending any connector pins. Also, before connecting a 
cable, make sure both connectors are correctly oriented and 
aligned.  

 

Do not attempt to service the system yourself except as explained in 
this manual. Follow installation instructions closely.