Q-See QSDT8PCDP User Manual

CHAPTER 8  P

.T.Z. CAMERAS

Click Add in User Configuration to access 
the

 Add User area.

Enter the user name, password, confirm 
password and select user rights, and then 
click OK.

Delete User
Select the user name in 

Configuration, and click Delete, and 
confirm delete. 

If you are installing a PTZ camera, then the PTZ controls must be set up before operating the 
camera. You should have your PTZ camera’s manual handy when configuring and operating 
the PTZ camera for the first time. You should have the information regarding the 

Baud Rate, 

Protocol and Address ready before you begin.

The PTZ settings are found in the Configuration menu. Click on the wrench icon on the 
right side of the Display Interface to enter the Configuration menu and then click on the 

PTZ menu to configure its settings.

CHAPTER 8

You can select different protocols, serial port 
number for P.T.Z devices.
The settings you enter here must match the 
setting on the PTZ camera.

Port - Users can set serial port number.
Protocol - Communication protocol of the 

P.T.Z device.

SuperDVR supports the following protocols:
DSCP, DH-SD, Lilian, Minking, Neon, PelcoD, 
PelcoP, Star, VIDO, VISCA

Address - Communication address of P.T.Z 

device (ID number)