Q-See QSDT8PCDP User Manual

 CHA

PTER

 9  REMOTE SUR

VEILLANCE & PLA

YBACK

You can choose where to store recorded files by selecting storage disk. By checking the 
Recycle check box, users can setup the software to continue recording after the hard drive is 
full by recording over the oldest files on the hard drive.

By clicking Copy To you can copy the setting 
of this channel to any other selected channel.

 Click the running figure  icon to access the 

Motion Configuration interface.

Sensitivity - Set motion detection sensitivity 

here.

Speed - Motion detection speed
Block number - Set grid’s number
Select all - Select all the areas of the channel 

as detection area

Clear all - Clear all the detection areas 

and then users can select customized 
detection areas using mouse curser.

By clicking Copy To you can copy the setting of this channel to any other selected channel.

Click the E-mail icon to access to 

E-mail Configuration interface.

Mail server setup
In this area, users can set receiver and 
sender’s E-mail SMTP server and address. 
Note: the address of receiver and sender can 
be the same.

SMTP server - Sender’s SMTP, such as 

smtp.yahoo.com

User name - Sender’s User Name
SMTP PORT - Mail server’s port, the default 

value of mail server is 25.

Password - Sender’s Password

You can select ‘My server requires a secure 
connections’ or ‘My outgoing server 
(SMTP)requires authentication’ check box 
according to server mail service policy of mail 
service provider.

Send to - Receiver’s E-mail Address
E-Mail from - Sender’s E-mail Address
Subject - E-mail Subject

You can select the ‘Set Mail Internal’ check 
box to set e-mail send time, such as 5 
seconds, 10 seconds and so on.

Attachment setup
Select ‘Attachment’ and the system will attach an image from the camera that triggered the 
alarm to the designated recipient.

Camera - Channel Name
Time - Display Time
Format - Image Format
Resolution - CIF or QCIF